Κατηγορίες προμηθειών

Q460nh πλάκα χάλυβα Corten

Material Name: Q460NH
Type: Weather-Resistant High-Strength Steel
Πρότυπο: GB/T 4171-2008
Εφαρμογή: Bridges, buildings, outdoor structures, garden features, and other applications requiring high-strength and corrosion resistance.

Mob: +8615713855753

Διεύθυνση: Lingang New Area, Κίνα (Σαγκάη) Pilot Free Trade Zone 2ος όροφος, No. 979, Yunhan Road

Hot-rolled Q460NH Corten Steel Plate is a high-strength, weather-resistant steel commonly used for structural applications due to its excellent combination of strength, corrosion resistance, and aesthetic appeal.

Dimensional Specifications:

Πάχος: 6mm – 60mm (can vary depending on the manufacturer)
Πλάτος: 1500mm – 3200mm
Μήκος: 6000mm – 12000mm (custom lengths available)
Other Custom Dimensions: Available upon request

Weather Resistance:

Self-Protecting Rust Layer: Q460NH develops a protective patina in response to environmental conditions, which minimizes further corrosion. This makes it suitable for use in outdoor applications without the need for painting or coating.

Advantages of Hot-Rolled Q460NH Plates:

Higher Strength: Q460NH provides higher yield and tensile strength compared to regular steel, making it suitable for load-bearing structures.
Enhanced Corrosion Resistance: The steel’s alloy composition, including copper and chromium, provides it with superior resistance to atmospheric corrosion.
Cost-Effective: Over its lifecycle, it requires less maintenance and upkeep due to its self-protective rust layer.

Q460NH Corten Steel Plate Specification Table

Property	Details
Material Name	Q460NH
Τύπος	High-strength, low-alloy, weather-resistant steel
Production Method	Hot-Rolled
Πρότυπο	GB/T 4171-2008
Πάχος	6mm – 60mm
Πλάτος	1500mm – 3200mm
Μήκος	6000mm – 12000mm (custom lengths available)
Tensile Strength (MPa)	≥ 550 MPa
Yield Strength (MPa)	≥ 460 MPa
Elongation (%)	≥ 19%
Impact Toughness (J)	≥ 27J at -20°C
Carbon (C)	≤ 0.12%
Silicon (Si)	0.20–0.55%
Manganese (Mn)	1.0–1.5%
Phosphorus (P)	≤ 0.035%
Sulfur (S)	≤ 0.035%
Chromium (Cr)	0.40–0.65%
Nickel (Ni)	≤ 0.65%
Copper (Cu)	0.25–0.55%
Corrosion Resistance	Develops a protective rust layer (patina) when exposed to atmospheric conditions
Surface Finish	Hot-rolled mill finish, optional oil coating
Weldability	Good; common welding techniques can be used
Applications	Bridges, building facades, outdoor structures, sculptures, shipping containers, etc.